Transforms and protects new or old wood surfaces from premature discoloration, mold and structural damage caused by water absorption.
forms an elastic vapor-permeable film on the surface, allows the tree to "breathe"
high protection against UV rays
durable weatherproof
environmentally friendly and safe, with very low odour
for exterior use
GENERAL FEATURES
UV resistant, prevent premature graying of wood surfaces
Keeps the color of the treated surface bright for a long time
High coverage opaque wood finish
Forms an elastic and vapor-permeable film on the surface, allows the tree to "breathe"
Water repellent
Durable and resistant to exterior weather conditions
Protection against cracking, flaking off and shape changing of the wood
Water-based, with very low odor
Environmentally friendly
Lead-free
For exterior use
TYPEOF SURFACE: all types of pressed wood (fibreboard, OSB, plywood, etc.), new or previously coated wooden surfaces.
WHERETOUSE: for exterior use
Suitable for all exterior wood except floors Doors and window joinery
Shutters
Claddings
Fences
Pergolas
Balcony railings
Roof fringes
Restorations
VISUAL EFFECT: opaque finish, satin sheen
2 bases for tinting on any European tinting systems.
White base / base for tinting in light shades.
Neutral base / base for tinting in rich and dark shades.
PACKAGESIZE and tinting
Suitable for tinting on any European tinting systems.
White base / base for tinting in light shades 0.75l (0.713l + 37ml of free volume for colorants). 2.5 liters (2.375 liters + 125 ml of free volume for colorants).
Neutral base / base for tinting in rich and dark shades 0.75l (0.675l + 75ml of free volume for colorants) 2.5 liters (2.25 liters + 250 ml of free volume for colorants).
Application Method: Brush
Number of Coats: 2 coats
Coverage (m2/L): 5 m2 with 2 coats depending on wood type
Drying Time (at 20°C and 40-65% relative humidity):
Recoat: 16 hours
Complete Dry: 16 hours
ProductData:
Solid Content (% weight): 52,6 ± 1
Viscosity (DIN6, 20°C): 70“ ± 5
Density (g/cm3): 1,29 ± 0,02
VOC (g/L): 28
Description: Water-based opaque exterior wood finish that allows wood to breathe
Type: Water-based
Thinning: Ready to use, does not require thinning. (At very high temperatures 10% drinking water may be added).
SurfacePreparation:
Remove any dirt, oil and wood dust from the surface.
Apply Acrylic Filling Paste on nailheads, joint points, capillary cracks and depths below 3 mm.
New Wood Surfaces:
Sand the surface with sandpaper #80/120.
Thoroughly clean the generated dust.
Old Uncoated Wood Surfaces:
Sand the weathered surface with sandpaper #80/120.
Thoroughly clean the generated dust.
Coated Wood Surfaces:
Do not apply the product directly on pre-coated surfaces.
Remove the old paint/varnish from the surface completely with a sandpaper.
Thoroughly clean the generated dust.
The surface of wood containing resins and natural oils should be cleaned with a cloth soaked in cellulosic thinner and dried out before the application.
Application:
The product is ready to use and does not require thinning. (At very high temperatures 10% drinking water may be added).
Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
Apply the product in 2 coats by brush and wait 16 hours between coats.
Perform a slight sanding with sandpaper #180/220 between coats.
Wait 16 hours for complete dry.
Maintenance (when the same product had been used before):
Do not apply the product directly on pre-coated surfaces.
Clean the wood surface completely from dirt and oil and perform a slight sanding.
Thoroughly clean the generated dust.
Repeat same process as described in “Application” with 1 or 2 coats depending on weathering.
Inspect annually and maintain as required.
Instructions:
FOR EXTERIOR USE ONLY.
NOT SUITABLE FOR FLOORINGS.
Keep product closed when not in use.
The general application temperature of the product is between 15 °C to 25°C at a relative humidity range of 40-65%.
The moisture content of the wood should be max. 20%.
Do not apply the product under direct sunlight or rain.
Do not apply linseed oil, basecoat/primer, yacht varnish before or after TIMBERCARE® SOLID COLOR STAIN applied surfaces.
The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
USE WITH ADEQUATE VENTILATION.
KEEP OUT OF REACH OF CHILDREN.
Do not transfer contents to other containers for storage.
Do not use empty cans for other purposes.
To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
Avoid contact with eyes and skin.
Wash hands after using.
FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
Dispose of contents/cans in accordance with national regulations.
Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
