- Home
- RockCare Aqua Stone
RockCare Aqua Stone
Water-based clear water repellent water sealer.
General Features:
- Clear, does not change the surface appearance forming
- Prevents frost damage with high water repellency
- Protects the surface from rain, dust and water damage
- Service life 5 years
- Allow surface to breathe
- Reduces chalking
- Ready to use
Where to Use:
- Cement, concrete, slate
- Clinker brick, briquet, terracotta, limestone, pumice stone
- Unpolished absorbent natural and unnatural stones
- Historical restorations
Packaging Size: 5 L
- Facades & Floors
- Cement
- Concrete
- Slate
RockCare Aqua Stone
Water-based clear water repellent water sealer
General Features:
- Clear, does not change the surface appearance forming
- Prevents frost damage with high water repellency
- Protects the surface from rain, dust and water damage
- Service life 5 years
- Allow surface to breathe
- Reduces chalking
- Ready to use
Where to Use:
- Cement, concrete, slate
- Clinker brick, briquet, terracotta, limestone, pumice stone
- Unpolished absorbent natural and unnatural stones
- Historical restorations
Packaging Size: 5 L
Color: Milky white / Clear after drying
Type: Water-based
Application Method: Brush, roller or spraying
Number of Coats: 2 coats (wet on wet)
Coverage (m2/L):
- Clay, sand and lime based bricks or briquets: 1,5 m²
- Clinker brick: 8,5 m²
- Limestone: 3,5 m²
- Pumice stone: 5,0 m²
- Concrete and cement: 5,0 m²
- Slate: 12-15 m²
Drying Time / Complete Dry (at 20°C and 40-65% relative humidity): 24 hours
Product Data:
Viscosity (DIN4, 20°C): 10 ± 2
Density (g/cm3): 1 ± 0,02
VOC (g/L): 0,5
Thinning: Ready to use, does not require thinning.
Surface Preparation:
Remove any dirt and dust from the surface.
If exists; clear the surface from oil, rust, mold or moss completely.
Repair cracks and loose parts on the surface.
Do not apply the product on pre-coated surfaces.
Allow the wet surface to dry completely before applying the product.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity.
- Apply the product in 2 coats by a brush, roller or spraying. Apply the 2nd coat before 1st coat dries (wet on wet).
- Wait 24 hours for complete dry.
- If it rains during application, cover the applied surface and keep it closed until completely dries.
Instructions:
- FOR EXTERIOR USE ONLY.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- Do not apply the product under direct sunlight or rain.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists.
- If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
Certificates: EN71-3 Toy Safety Certificate
Shelf Life (5-35°C): 3 years for unopened can