TimberCare Hard Wax Color Oil

TIMBERCARE HARD WAX COLOR OIL

PROTECTIVE AND CARE HARD WAX COLOR OIL COATING FOR INTERIOR WOOD SURFACES

A one-component composition of natural oils and carnauba wax that provides protection and care for all interior wood surfaces including furniture and flooring.

Ahigh-qualitycompositionhas the followingunique characteristics:

• a beautiful finish on the treated with oil wood surface and maximum operational and protective properties in only 1 coat; ☑ for horizontal and vertical surfaces;
• economical consumption;
• comfort and speed of the full cycle of works, coating in just 1 day of work.

GENERAL FEATURES:

• One-coat protection
• Oil-based- it penetrates deeply into the wood surface, emphasizes the natural grain structure of the wood
• Non-film forming, protects the wooden surface from within, gives the wood ability to breathe
• No overlaps marking
• High abrasion and scratch resistance
• Water repellent
• Suitable for all types of wood, including hard ones (wenge, jatoba, etc.)
• Enhance the natural beauty of wood
• Gives the wood a silky smooth feel to touch
• Slip resistant (slip resistant class R9)
• Easy to use, does not require special skills;
• Environmentally friendly, suitable for kids’ toys (in accordance with EN71-3)
• Does not contain heavy metals and lead
• For interior use.

TYPE OF SURFACE: for any untreated or stained type of wood (hardwood and softwood).

WHERE TO USE: for any wooden surfaces in the interior. Bare wood or previously oiled interior woods and furniture.

• floors: solid wood, parquet, cork, hardwood and softwood floors
• stairs: steps, balusters, handrails
• doors, windows, window sills
• walls and ceilings
• furniture and pieces of furniture made of solid or glue-laminated wood (tables, chairs, tabletops, etc.)
• children ’s furniture, and toys (in accordance with EN71-3)

VISUAL EFFECT

Color: 2 Clear Natural look coatings + 10 color satin coatings.

Variant №1: transparent Clear Natural look coatings.

2 levels of sheen: Satin or Matte. Creates a uniform coating, amplifies the beauty of the grain of wood species. Variant №2: 10 color coatings (Satin).

Creates a uniform Satin coating, amplifies the beauty of the grain of wood species.

Packaging Size:

Clear Natural look coatings 175 ml, 0.75 L

Color coatings 175 ml, 0.75 L

Application Method: Brush, cloth or polishing machine

Number of Coats : 1 coat

Coverage (m2/L): 30 m2 depending on wood type and application method

Drying Time (at 20°C and 40 -65% relative humidity):

Touch Dry: 15 minutes

Complete Dry: 24 hours

Full Cure: 7 days

Product Data:

Solid Content % (weight): 69 ± 2

Viscosity (DIN6, 20°C): 12“ ± 2

Density (g/cm3): 0,95 ± 0,02

VOC (g/L): 255

Type: Natural oil based

Thinning: Ready to use, does not require thinning.

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.
• Do not use products like cellulose or polyurethane filler or primer before the application of the product. As a filler, mix the wood dust with the product and fill all gaps and joints of the parquet. Clean the excess paste after it has dried out.

Untreated Wooden Surfaces:

• Sand the surface according to the desired surface appearance. I.e., it is recommended to sand with #80/120 for a natural finish and #180-300 for a smoother texture.
• Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
• Remove the remaining dust with a damp cloth.

Oiled Wooden Surfaces:

• Remove the remaining dust with a damp cloth.

Old Uncoated Wooden Surfaces:

• Sand the weathered surface according to the desired surface appearance. I.e., it is recommended to sand with #80/120 for a natural finish and #180-300 for a smoother texture.
• Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
• Remove the remaining dust with a damp cloth.

Varnished Wooden Floors:

• Do not apply the product directly on pre-coated surfaces.
• Remove the old varnish from the parquet completely with a scraping machine. Remove any dirt, oil, wood dust and old varnish residues from the surface.
• Sand the surface according to the desired surface appearance. I.e., it is recommended to sand with #80/120 for a natural finish and #180-300 for a smoother texture.
• Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner.
• Remove the remaining dust with a damp cloth.

Application:

• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.

Manual Application:

• Apply the mixture along the edges for floorings.
• Apply the product in 1 coat by a brush or cloth in zones of 5 m2 and leave 15 minutes for penetrating the oil. Thoroughly remove the excess oil by cloth within 15 minutes per zone till surface feels dry.
• Apply in the direction of wood grain to get a homogeneous look.

Machine Application:

• Apply the mixture along the edges for floorings.
• Use polishing machine with red buffer pad for leveling the product to the surface.
• Pour a quantity product to surface or buffer pad’s hollow and apply in zones of 5 -10 m2. Leave 15 minutes for penetrating the oil. Thoroughly remove the excess oil by white buffer pad within 15 minutes per zone till surface feels dry.
• Apply in the direction of wood grain to get a homogeneous look. The treated surface may be stepped on after 24 hours.
• Allow 7 days for full cure.

Instructions:

• FOR INTERIOR USE ONLY.
• Do not apply products such as nitro, polyurethane basecoats or primers before Hardwax Oil.
• Keep product closed when not in use.
• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40 -65%. The moisture content of the wood should be below 12%.
• The area should be ventilated during and after the application to promote the drying.
• The product should not be applied when the weather or surface temperature is below 10°C.
• The floor should not be cleaned with ammonia containing cleaning materials.
• The varnished floor can be stepped on after 24 hours. Allow 7 days before spreading carpet and/or cleaning.
• The product should be stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water and mineral spirits after application.

Safety Precautions:

• OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates:

• EN71-3 Toy Safety Certificate