TimberCare Facade Color Stain

• forms an elastic vapor-permeable film on the surface, allows the tree to "breathe"
• high protection against UV rays for long-term color retention
• durable weatherproof

• UV resistant, prevent premature graying of wood surfaces
• Water repellent
• Durable and resistant to exterior weather conditions
• Does not crack, peel or blister
• Keeps the color of the treated surface bright for a long time
• Forms an elastic and vapor-permeable film on the surface
• Allows wood to breathe
• High coverage
• Translucent wood finish
• Lead free
• For exterior use

TYPE OF SURFACE: all types of pressed wood (fibreboard, OSB, plywood, etc.), new or previously coated wooden surfaces.

WHERE TO USE:

• Suitable for all exterior wood: summer houses, trellises, fences, garden furniture and decor
• Doors and window joinery
• Shutters
• Claddings
• Fences
• Pergolas
• Balcony railings
• Roof fringes

Not suitable for floors.

VISUAL EFFECT / tinting : a semi-transparent color finish that emphasizes the grain of the wood.

Gloss: Semi-gloss

Tint base clear - base for tinting in any shades, including deep and dark shades.

Suitable for tinting with any European tinting systems.

Packaging Size:

• 0.75 l (0.72 l + 30 ml of free volume for colorants).
• 2.5 liters (2.4 liters + 100 ml of free volume for colorants).

Application Method: Brush

Number of Coats : 2 coats

Coverage (m2/L): 6-7 m with 2 coats depending on wood type Drying Time (at 20°C and 40 -65% relative humidity): Recoat: 24 hours

Complete Dry: 24 hours

Product Data:

Solid Content (% weight): 63 ± 1

Viscosity (DIN4, 20°C): 75“ ± 2

Density (g/cm3): 1 ± 0,02

VOC (g/L): 378

Thinning: Ready to use, does not require thinning.

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.

New Wood Surfaces:

• Sand the surface with sandpaper #80/120.
• Thoroughly clean the generated dust.

Old Uncoated Wood Surfaces:

• Sand the weathered surface with sandpaper #80/120.
• Thoroughly clean the generated dust.

Coated Wood Surfaces:

• Do not apply the product directly on pre-coated surfaces.
• Remove the old paint/varnish from the surface completely with a sandpaper.
• Thoroughly clean the generated dust.

Application:

• The product is ready to use and does not require thinning.
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply the product in 2 coats by brush and wait 24 hours between coats.
• Perform a slight sanding with sandpaper #180/220 between coats.
• Wait 24 hours for complete dry.
• Apply in the direction of wood grain to get a homogeneous look.

Maintenance (when the same product had been used before):

• Do not apply the product directly on pre-coated surfaces.
• Clean the wood surface completely from dirt and oil and perform a slight sanding.
• Thoroughly clean the generated dust.
• Repeat same process as described in “Application” with 1 or 2 coats depending on weathering.
• Inspect annually and maintain as required.

Instructions:

• FOR EXTERIOR USE ONLY.
• NOT SUITABLE FOR FLOORINGS.
• Keep product closed when not in use.
• The general application temperature of the product is between 15 °C to 25°C at a relative humidity range of 40-65%.
• The moisture content of the wood should be max. 20%.
• Do not apply the product under direct sunlight or rain.
• Do not apply linseed oil, basecoat/primer, yacht varnish before or after TIMBERCARE® FAСADE COLOR STAIN applied surfaces.
• The product should be stored at tem peratures between 5°C to 35°C.
• Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.